Phone in the UK: +44 7826 178752 [email protected]

LV5333 – Multi SDI Monitor with 3G Capabilities

Category:

LV5333 – Waveform Monitor for 3G/HD/SD SDI Signals

The LV5333 is a great and powerful tool in a compact and portable product.  Just like its predecessor, the LV5333 boasts a 6.5″ high-fidelity TFT LCD screen for high quality picture images.  Waveform, Vectorscope, Audio, 5-bar Display, and Status analysis are all possible in this instrument.  Just like the previous waveform monitors from LEADER, various multi-display combinations allow for complete and easy monitoring wihle full-screen presentations provide a wealth of information and enable detailed review of the material.  It also offers an embedded audio signal display allowing level-meter measurements.

Plus new features like Cable Length, External Phase Difference, and Field Frequency Deviation measurements are added to the list of characteristics.  CINELITE® II and other software options come included for this specific product, making it not only an attractive technical instrument but also a  creative one at the same time.

 

MAIN FEATURES:

  • Supports 3G-SDI, HD-SDI and SD-SDI.
  • Built-in 6.5″ TFT LCD XGA Display (1,024 x 768) for superb, crisp waveforms and picture representations.
  • CINELITE® II (Cinelite® and Cinezone®) and CINELITE® ADVANCED come standard with this product.
  • Histogram, User Gamma Display, Gamut and Level Error functions come now standard in the LV5333.
  • Line Selector allows to choose any line of the video signal to be displayed and provides waveform, vector, and 5-bar representations of that specific line.
  • Supports Closed-Captions EIA608.
  • Cable Length, EXT Phase, and  Field Frequency Deviation Measurements.
  • Up to 8 channels of embedded audio signals can be displayed using audio bar level meters.
  • Extracts embedded audio signals and sends two user-selectable audio channels to the headphone jack.
  • Audio shortcut button located on the front panel.
  • Includes “Screen Capture” to capture the displayed image and save it to the internal memory (RAM) or in to an USB memory device.
  • The internal memory holds up to 30 presets allowing quick access to favorite instrument setups.
  • Instrument  can be remote controlled from a PC over an Ethernet network.
  • Can be mounted on a tripod for on-camera fitting.
  • Universal AC Power Supply allows for worldwide use.
  • Battery Adapters for IDX and Anton Bauer are available.
LV 5333 - Rear Panel and Connectors

LV 5333 – Rear Panel and Connectors

 

LV5333 Data Sheet (EU)

For a complete list of the technical specifications, please download the instruction manual for this product.
(Free registration to this website is required).

Bit Rate

3G-SDI 2.970 Gbps or 2.970/1.001 Gbps SMPTE ST424
SMPTE ST425
HD-SDI 1.485 Gbps or 1.485/1.001 Gbps SMPTE ST292
SD-SDI 270 Mbps SMPTE ST259

SD-SDI Format and Compliance Standards

Color System
Quantization
Image
Field Frequency/Scanning
Compliance Standard
YCbCr 4:2:2 10 bit 720 x 487 59.94/I SMPTE ST259
720 x 576 50/I

HD-SDI Format and Compliance Standards

Color System
Quantization
Image
Field Frequency/Scanning
Compliance Standard
YCbCr 4:2:2 10 bit 1280 x 720 60, 59.94, 50, 30, 29.97, 25, 24, 23.98/P SMPTE ST296
1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
SMPTE ST274

3G-Level A Format and Compliance Standards

Color System
Quantization
Image
Field Frequency/Scanning
Compliance Standard
YCbCr 4:2:2 10 bit 1920 x 1080 60, 59.94, 50/P SMPTE ST274
12 bit 1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
YCbCr 4:4:4 10 bit 1280 x 720 60, 59.94, 50, 30, 29.97, 25, 24, 23.98/P SMPTE ST296
1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
SMPTE ST274
12 bit 1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
RGB 4:4:4 10 bit 1280 x 720 60, 59.94, 50, 30, 29.97, 25, 24, 23.98/P SMPTE ST296
1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
SMPTE ST274
12 bit 1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
2048 x 1080 24, 23.98/P
24, 23.98/PsF
SMPTE ST2048-2

3G-Level B Format and Compliance Standards

Color System
Quantization
Image
Field Frequency/Scanning
Compliance Standard
YCbCr 4:2:2 10 bit 1920 x 1080 60, 59.94, 50/P SMPTE ST274
12 bit 1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
YCbCr 4:4:4 10 bit 1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
12 bit 1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
RGB 4:4:4 10 bit 1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
12 bit 1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
2048 x 1080 24, 23.98/P
24, 23.98/PsF
SMPTE ST2048-2

3G-Level B DS Format and Compliance Standards

Color System
Quantization
Image
Field Frequency/Scanning
Compliance Standard
YCbCr 4:2:2 10 bit 1280 x 720 60, 59.94, 50, 30, 29.97, 25, 24, 23.98/P SMPTE ST296
1920 x 1080 60, 59.94, 50/I
30, 29.97, 25, 24, 23.98/P
30, 29.97, 25, 24, 23.98/PsF
SMPTE ST274

GENERAL SPECIFICATIONS

Environmental Conditions
Operating Temperature 0 to 40oC
Operating Humidity Range 85% RH or less (no condensation)
Optimal Temperature 10 to 30oC
Operating Environment Indoors
Elevation Up to 2000 m
Overvoltage Category II
Pollution Degree 2
Power Requirements
Voltage 10 to 18 VDC
Power Consumption 28W max.
Dimensions (excluding protrusions)
215mm (W) x 128mm (H) x 63mm (D)
Weight (excluding options)
1.5 kg
Accessories
(1) Instruction Manual, (1) 15-pin D-sub connector, (1) 15-pin D-sub connector cover, (1) VESA spacer, (1) Ferrite core

Input / Output Connectors

SDI Input Connectors
Connector Type BNC Connectors, 2 inputs (switching between A and B)
Input Impedance 75Ω
Input Return Loss ≤ 15dB for 5MHz to the serial clock frequency
Maximum Input Voltage ± 2V (DC + peak AC)
SDI Output Connectors
Function Reclocks and transmits the selected SDI input signal
Connector Type BNC connector, 1 output
Output Impedance 75Ω
Output Voltage 800 mVp-p ± 10%
External Sync Input*1
Input Signals Tri-level Sync or NTSC/PAL Black Burst signal
Connector Type BNC connectors, 2 connectors / 1 input
Input Impedance 15kΩ passive loop-through
Input Return Loss ≤ 30dB for 50kHz to 30MHz
Maximum Input Voltage ± 5V (DC + peak AC)
Digital Audio Output Connectors
Function Extracts and transmits two channels of the audio signals embedded in an SDI signal
Connector Type BNC
Output Impedance 75Ω
Output Voltage 1.0 Vp-p ± 10% (into 75Ω)
Compliant Standard AES-3id
Headphone Output
Function Extracts and transmits two channels of the audio signals embedded in an SDI signal
Channel Settings Assign any of the channels in the selected audio group to L and R
Connector type One stereo miniature jack
Volume Adjustment From the menu
Impedance 32Ω (16 to 600Ω)
*1: If the video signal waveform or the phase difference is displayed using an external sync signal as a reference, the waveform phase one clock before or after an SDI signal is inserted or the power is turned on is indefinite.  External sync mode does not work for 30, 29.97, 25, 24, 23.98/P for 3G-A 1280 x 720

Control Connectors

USB Port
Function Saves screen captures, preset data, event log data, and data dumps
Compliant Standard USB 2.0
Media Only USB memory devices are supported
Remote Connector
Function Load preset settings, switch input channels, enable the tally display, and transmit the alarm signal
Control Signal TTL level (low active)
Control Connectors 15-pin D-sub (female)
Locking Screws Inch screws (no. 4-40UNC)
Ethernet Port
Function Control the LV5333 from a PC and monitor errors and other events
Compliant Standard IEEE 802.3
Supported Protocols TELNET, FTP, SNMP
I/O Connector One RJ-45 jack
Type 10Base-T/100Base-TX auto switching

LCD

LCD Type 6.5-inch color TFT
Resolution XGA.  The effective area is 1024 x 768 dots
Backlight Brightness HIGH, LOW
Auto Shutoff LCD can be automatically turned off after a set period of time

AVAILABLE OPTIONS:

LV5333SER02 HD-HDR Option

LV5333SER02 is a function to evaluate HDR video signal by picture display and waveform display.
In the picture display, it can be checked easily the luminance distribution by coloring according to the luminance of the HDR area.
In the waveform display, level management including the HDR area can be performed by the HDR scale.
Although it is for 3G / HD-SDI, it can also support 4K HDR display by using 4K 2 sample interleaved 1 signal or HD monitor output from 4K camera.

 

MAIN FEATURES:

  • Compatible with Various HDR Standards
    It supports HLG (Hybrid Log Gamma) conforming to ITU-R BT.2100, ARIB STD-B 67, SMPTE ST 2084 and PQ (Perceptual Quantization).
    In addition, it supports S-Log 3C-Log (Future), Log-C (Future).
  • Enhanced CINEZONE
    Enables the user to check the brightness levels of HDR content easily by identifying the SDR range in monochrome and the HDR range in color.
  • HDR Scale
    By matching the WFM scale to the HDR standard, you can easily check the brightness level.
  • License Option
    Because it is a license option, you can install it even after purchasing LV5333.

AVAILABLE ACCESSORIES:

  • LR-2752-U: Rackmount Adapter for LV5330 and LV5333
  • LC-2130-U: Blank Panel for LR-2752-U
  • LC-2150:  Tilt Stand for LV5330 and LV5333 (Replaces LV5330-TS)
  • LC-2250-U: Carrying Case for LV5330 and LV5333
  • LV5330-OP73: Battery Mount for IDX batteries (external connection)
  • LV5330-OP73U: Battery Mount for IDX batteries (internal connection)
  • LV5330-OP74: Battery Mount for Anton Bauer batteries (external connection)
  • LV5330-OP74U: Battery Mount for Anton Bauer batteries (internal connection)
  • LV5330FL:  Fanless Cabinet for LV5330 and LV5333
  • AC Adapter:  AC Adapter for LV5330, LV5333, LV5381, LV5382, LV7330

2-YEAR STANDARD WARRANTY

Leader Instruments Corporation warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purchase.

Leader’s obligation under this warranty is limited to repairing or replacing, at its sole option, any such defective product. Product must be returned to a Leader Service Center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence, and misapplication, altered or modified in any way.

LEADER EXPRESSLY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESSLY IMPLIED AND STATUTORY, INCLUDING WITHOUT LIMITATION, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

LEADER EXPRESSLY DISCLAIMS AND EXCLUDES ALL LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES.

 

EXTENDED WARRANTY

In addition, we offer extended warranty coverage for an additional year (3-year extended warranty) or three years (5-year extended warranty). For your peace of mind, we highly suggest considering any of these extended warranties as soon as possible (and before the end of the standard warranty period) because, in some cases, the cost to repair your instrument could be up to 50% of the original purchase value. If interested in any of these extended warranties, please contact your LEADER authorized representative or visit our Warranty Page for details and pricing (within 30 days of original purchase).

View Warranty Info

 

IMPORTANT NOTE:
Damage caused due to negligence or accident is not covered by Leader’s Warranties. LCD Display, CRT and transformer parts costs are not covered by the Extended Warranty. There is no Extended Warranty available for accessories.